Manufacturer's hot pin 3D printing consumables PLA ABS 3D printer 3D print pen consumables
Material: PLA
Fields: medical, teaching, food
PLA material characteristics
Keep the shape, not easy to change. Environmentally friendly and degradable
The materials are more suitable for fields that require high environmental protection, such as medical treatment, teaching, and food.
①Biodegradable materials, environmental protection
②High gloss of printed products
advantage
③Good fluidity, printing is not easy to crack
④Printing large area products is not easy to warp
⑤No smell during printing
Disadvantage
① Poor weather resistance
②The impact resistance is relatively low
| material | PLA material | ABS material |
| Printing temperature | 195~230C | 220~250C |
| density | 1.25+0.05g/cm3 | 1.04+0.2g/cm3 |
| Melt flow rate | 5-7g/10min(190C 2.16kg) | 2-4g/10min(190C 2.16kg) |
| Water absorption | 0.50% | 1% |
| Tensile Strength | ≥60Mpa | ≥43Mpa |
| Flexural modulus | ≥60Mpa | ≥60Mpa |
| Elongation at break | ≥3.0% | ≥1 0.0% |
| diameter | 3mm/ 1.75mm(+0.02mm) | 3mm/ 1.75mm(+0.02mm) |
| bubble | 100% bubble-free | 100% bubble-free |
| net weight | 1kg (line length is about 340M) | 1kg (line length is about 400M) |
| heat | 0~60C | 80~120C |
Material: PLA
Fields: medical, teaching, food
PLA material characteristics
Keep the shape, not easy to change. Environmentally friendly and degradable
The materials are more suitable for fields that require high environmental protection, such as medical treatment, teaching, and food.
①Biodegradable materials, environmental protection
②High gloss of printed products
advantage
③Good fluidity, printing is not easy to crack
④Printing large area products is not easy to warp
⑤No smell during printing
Disadvantage
① Poor weather resistance
②The impact resistance is relatively low
| material | PLA material | ABS material |
| Printing temperature | 195~230C | 220~250C |
| density | 1.25+0.05g/cm3 | 1.04+0.2g/cm3 |
| Melt flow rate | 5-7g/10min(190C 2.16kg) | 2-4g/10min(190C 2.16kg) |
| Water absorption | 0.50% | 1% |
| Tensile Strength | ≥60Mpa | ≥43Mpa |
| Flexural modulus | ≥60Mpa | ≥60Mpa |
| Elongation at break | ≥3.0% | ≥1 0.0% |
| diameter | 3mm/ 1.75mm(+0.02mm) | 3mm/ 1.75mm(+0.02mm) |
| bubble | 100% bubble-free | 100% bubble-free |
| net weight | 1kg (line length is about 340M) | 1kg (line length is about 400M) |
| heat | 0~60C | 80~120C |